0
<-- nev left start -->

Lightweight Panels

Lightweight Panels
Lightweight Panels
Product Description

Thickness

  • 20 mm (0.8")
  • 50 mm (2")

Wall thickness

  • 20 mm: 3,5 mm (0.8": 0.14")
  • 50 mm: 3,5 mm (2": 0.14")

Material

  • PP COPO
  • HDPE

Internal structure

  • 100 mm x 50 mm (4" x 2")
Thickness Length x width
20 mm (0.8") 1200 x 800 mm (47.24" x 31,50")*
1200 x 1000 mm (47.24" x 39.37")*
50 mm (2") 1200 x 800 mm (47.24" x 31.50")*
1200 x 1000 mm (47.24" x 39.37")*
2600 x 1000 mm (102.36" x 39.37")


Weight

Material 20 mm (0.8") 50 mm (2")
PP +/- 7,5 kg/m²
+/- 1.54 lb/ft²
+/- 10 kg/m²
+/- 2.05 lb/ft²
HDPE +/- 8 kg/m²
+/- 1.64 lb/ft²
+/- 11 kg/m²
+/- 2.25 lb/ft²

Isolation value

Thickness Material R [m²K/W]
20 mm (0.8") PP 0.189
50 mm (2") PP 0.242
50 mm (2") PE 0.222

Colours (US:Colors)

  • PP prime: UV beige (RAL 7032), UV white (RAL 9010)
  • PP near to prime: Light grey (RAL 7001), white (RAL 9010), blue (RAL 5002)
  • PP recycled: Light green, black
  • Other colours (colors) possible on request.
  • Paneltim advises against using dark colours (colors) for outside use.

Open half panels

Also the half panels can be offered on demand. These open half panels with a thickenss of 11 or 27 mm (0.43" or 1.06") are smooth and flat on one side and have an open rib structure on the other side.


Flexible

Panels with dimensions 1200 mm x 800 mm (47.24" x 31.50") and 1200 mm x 1000 mm (47.24" x 39.37") always have a double rib (cross) in the middle. This facilitates the production of panels of height 40 cm, 50 cm and 60 cm (15.75", 19.69" and 23.62").


No internal accumulation of dirt

The internal cell structure ensures that the panels are always closed all around, even when cutting to size, avoiding ingression of dirt or moisture into the panels.


Processing

The panel can be processed using regular technic to make plastic constructions: butt welding, extrusion welding or hot air welding. The short welding cycle considerably improves overall processing time.
The panels being manufactured in prime polypropylene or polyethyleen, joining with solid panels, tubes, etc is possible.


Available on request

  • Structural analysis
  • Technical files

Advice and support

  • Paneltim strongly recommends avoiding dark colors for outside use.
  • Paneltim strongly recommends prime material for structural applications.
  • Technical datasheets are only available for panels in prime material.

Contact Us

Plot No. 10006/C, Nr. Dhiraj Can, Karmatur Chowkdi, GIDC Estate,, Ankleshwar, Gujarat, 393002, India
Phone :09377541665