Antislip panels

Antislip structure

• Five bars
• Studs
• Orange skin

Thickness

• 50 mm (2")

Wall thickness

• Five bars: 3.3 mm (0.13")
• Studs: 3.3 mm (0.13")
• Orange skin: 3.3 mm (0.13")

Material

PP COPO / HDPE

• Internal structure : 50 mm x 50 mm (2x2")
• Standard dimensions :1200 mm x 1000 mm x 50 mm (102.36" x 39.37" x 1.97") (L x W x H)

The panels have three double ribs in the width and one in the length.

Weight-Five bars

• PP: 12 kg/m (2.50 lb/ft)
• HDPE*: 13 kg/m (2.70 lb/ft)

Studs

• PP: 12 kg/m (2.50 lb/ft)
• HDPE*: 13 kg/m (2.70 lb/ft)

Orange skin

• PP: 11 kg/m (2.30 lb/ft)

Isolation value-Five bars

• PP 50 mm: R [mK/W] = 0.274
• HDPE 35 mm: R [mK/W] = 0.245

Outside edge

    Distance from antiskid profile to edge: 40 mm (1.57")
    Orange skin: no outside edge

Double rib

The antislip panels have double rib in the middle (cross). This facilitates production of 40 cm, 50 cm and 60 cm (15.75", 19.69" and 23.62") high panels.

Colours (US:Colors)

• PP prime: UV beige (RAL 7032)
• PP recycled:Black
• PE* prime:UV white (RAL 9010), black
• Other colours (colors) possible on request.
• Paneltim advises against using dark colours (colors) for outside use.

Open half panels

On specific request half panels with antiskid profile can be offered. These open half panels have a thickness of 27 mm (1.06"), a checker plate or studs profile on the one side, and an open rib structure on the other side.

Extensive testing

Both antiskid profiles (checker plate, studs) have been tested for their antiskid properties. Both profiles perform well under these tests, both in wet and in dry condition.

Flexible

The antiskid profiles always have a double rib (cross) in the middle. This facilitates the production of antiskid panels of 40 cm, 50 cm and 60 cm (15.75", 19.69" and 23.62").

No internal accumulation of dirt

The internal cell structure ensures that the panels are always closed all around, even when cutting to size, avoiding ingression of dirt or moisture into the panels.

Processing

• The panel can be processed using regular technic to make plastic constructions: butt welding, extrusion welding or hot air welding. The short welding cycle considerably improves overall processing time.
• The panels being manufactured in prime polypropylene or polyethyleen, joining with solid panels, tubes, etc is possible.

Available on request

• Structural analysis
• Technical files

Advice and support

• Paneltim strongly recommends avoiding dark colors for outside use.
• Paneltim strongly recommends prime material for structural applications.
• Technical datasheets are only available for panels in prime material.